Set di ventole con staffa (2024 KTM/Husqvarna/GasGas) SPAL

The fan set is plug & play compatible with KTM, Husqvarna and GasGas.

The plugs for the fan are already provided on the standard wiring harness, and from 2024 the required relay is also already installed. The control unit automatically switches the fan on and off using the coolant temperature information.

-> Very simple installation!

The fan supplied is the original KTM fan part number 58435041000 (costs 104.72 € at KTM).

The supplied relay is also original KTM, part number 61111057000 (costs 14,81 € at KTM)

Suitable for:

KTM EXC 250/300 TBI from 2024 onwards

KTM EXC-F from 2024

Husqvarna TE 250/300 TBI from 2024

Huaqvarna FE from 2024

GasGas EC/EC-F from 2024

In the KTM EXC 300 ERZBERG and from 2024 the HARDENDURO special edition these components are already fitted as standard.

From 2024 model all bikes (KTM, Husqvarna and GasGas) already have the relay installed, you can now use part number D1133 from 2024 (this is the same set only without the relay).

Assembly:

1) Screw or rivet the fan to the bracket (material is supplied for both options). Make sure the direction of the cable outlet is correct (cable outlet to the left or upwards).

2) Screw the bracket together with the fan to the radiator.

3) Connect the fan to the connector under the tank.

4) The relay socket (plug purple, in rubber cap) is located directly under the seat on the current 2-stroke models. On the 4-stroke models and